Samsung Security Camera SPH 20W P User Guide

SPEED DOME OUTDOOR HOUSINGS  
INSTRUCTION MANUAL  
SPH-20W/P  
SWH-20W/P  
삼성테크윈주식회사  
SAMSUNG TECHWIN CO., LTD  
OPTICS & DIGITAL IMAGING DIV. 145-3, SANGDAEWON 1-DONG, JUNGWON-GU,SUNGNAM, KYUNGKI-DO, KOREA  
462-703  
TEL :82-31-740 -8137~41  
FAX:82 -31-740- 8145  
SAMSUNG OPTO-ELECTRONICS AMERICA, INC.  
40 SEAVIEW DIRVE, SECAUCUS N.J 07094, U.S.A.  
TEL :(201)902-0347 FAX:(201)902-0429  
SAMSUNG CCTV SYSTEMS  
 
SAFETY PRECAUTIONS  
IMPORTANT SAFEGUARDS  
1. Read Instructions - All the safety and operating instructions should be read  
before the unit is operated.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
2. Retain Instructions - The safety and operating instructions should be  
retained for future reference.  
CAUTION :  
3. Heed Warnings - All warnings on the unit and in the operating instructions  
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT  
REMOVE COVER (OR BACK), NO USER SERVICEABLE  
PARTS INSIDE. REFER SERVICING TO QUALIFIED  
SERVICE PERSONNEL.  
should be adhered to.  
4. Follow Instructions - All operating and user instructions should be followed.  
5. Electrical Connections - Only a qualified electrician should make electrical  
The lightning flash with an arrowhead symbol, within an equilateral triangle,  
is intended to alert the user to the presence of non-insulated "dangerous  
voltage" within the product's enclosure that may be of sufficient magnitude  
to constitute a risk of electric shock to persons.  
connections.  
6. Attachments - Do not use attachments not recommended by the product  
manufacturer as they may cause hazards.  
7. Cable Runs - All cable runs must be within permissible distance.  
The exclamation point within an equilateral triangle is intended to alert the  
user to presence of important operating and maintenance (servicing)  
instructions in the literature accompanying the appliance.  
8. Mounting - This unit must be properly and securely mounted to a supporting  
structure capable of sustaining the weight of the unit. Accordingly:  
a. The installation should be made by a qualified installer.  
b. The installation should be in compliance with local codes.  
UNPACKING  
c. Care should be exercised to select suitable hardware to install the unit,  
taking into account both the composition of the mounting surface and the  
weight of the unit. Be sure to periodically examine the unit and the  
supporting structure to make sure that the integrity of the installation is  
intact. Failure to comply with the foregoing could result in the unit  
separating from the support structure and falling, with resultant damages or  
injury to anyone or anything struck by the falling unit.  
Unpack carefully. Electronic components can be damaged if improperly handled  
or dropped. If an item appears to have been damaged in shipment, replace it  
properly in its carton and notify the shipper.  
Be sure to save:  
1. The shipping carton and packaging material. They are the safest material in  
which to make future shipments of the equipment.  
2. These Installation and Operating Instructions.  
2
3
OUTDOOR DOME HOUSINGS  
OUTDOOR DOME HOUSINGS  
 
FEATURE  
ELECTRICAL SPECIFICATIONS:  
Input power : Housing & Camera - 12 VDC  
22 watts at 12 VDC  
Heater : 20 watts  
Blower : 2 watts  
Durable engineered plastic top, 94VO, outdoor and  
pressurized models are UV protected.  
Accepts many manufacturers’ unitized camera systems.  
·The heater activates at 40 F ( 8 F), deactivates at 60 F ( 8 F).  
·The blower always activates.  
Accepts single fixed camera.  
GENERAL INSTRUCTIONS:  
Available in wall or pendant mount.  
Tools Required: .100" Flat Head Screwdriver  
Phillips Head Screwdriver  
PREPARING PENDANT MOUNT BRACKET  
(For wall mount see page 7)  
Temperature rating -50 F standard.  
1. Carefully remove the housing from the packaging material.  
Check to be sure all parts are present.  
2. This unit includes a 1 1/2" NPT housing coupling that can be used with a  
standard 1 1/2" NPT pipe.  
DESCRIPTION:  
All plastic components are designed to be UV stable; the housing top is  
rated at 94VO. The wall mountunit measures 11.5" (w) x12.9 (h) x 16"  
(d), with a weight of 7 lbs.; measurements for the pendant mount unit  
are 11.5" (w) x 12.9" (h) x 11.5" (d), 7 lbs. Flying leads are provided for  
all incoming power, control, and video connections. The leads are  
supplied with a standard BNC and screw down connectors. A 22 watt  
heater and a circulation blower are also provided. To service, remove  
the lower dome and ring assembly.  
3. Attach the housing coupling to the bracket or pendant pipe (Figure 1).  
·This unit can be used with brackets designed with 1 1/2" male pipe  
threads that don’t be supplied.  
·Pipe threads should be clean and rust free. Use a sealer (such as  
Teflon™ tape or silicone sealer) on the threads.  
Add thread  
sealing tape  
Figure 1  
Be sure the bracket is properly and securely mounted to a supporting  
structure capable of rigidly holding the weight of the entire unit.  
4
5
OUTDOOR DOME HOUSINGS  
OUTDOOR DOME HOUSINGS  
 
INSTALLING QUICK RELEASE BRACKET AND  
UNITIZED CAMERA ASSEMBLY  
INSTALLING THE HOUSING ASSEMBLY  
FOR WALL MOUNT VERSIONS  
1. A wall mount bracket comes standard with this unit, and a template is  
included to use as a guide for mounting the bracket to a wall. Choose the  
desired location for installation and mark the drill holes using the template.  
Screw (2) bolts (not provided) about 3/4 of the way into the (2) top holes. Run  
approximately 8" of wiring out of the wall.  
It is recommended that this be done before installing the housing.  
1. Open the housing by loosening the (3) captive screws located on the housing  
ring next to the lower clear dome. Be careful not to back these all the way out.  
Twist the dome and ring assembly slightly in a counterclockwise motion to  
remove (Figure 2).  
2. Open the access door on the bottom of the wall mount by loosening the screw  
nearest the mounting plate (Figure 3).  
3. Slip the housing onto the top (2) bolts and pull the wires from the wall through  
the rectangular hole in the wall mount bracket. Screw bolts and washers  
through the bottom (2) holes and secure. Remove the top (2) bolts, add  
washers, and reattach, tightening completely.  
4. Attach the wires from the wall to the connector provided, using the wiring  
color code chart as a guide.  
Loosen screws only,  
do not remove  
5. Once all wiring connections are made, place the wires inside the wall mount  
bracket and close the access door. Secure with the screw removed earlier.  
6. Clean the outside of the dome with the text wipe provided.  
Remove dome by  
twisting counter-  
clockwise  
Place for  
connectors  
Figure 2  
2. Install the pan/tilt unit quick-release bracket. It is recom- mended that this be  
done before installing the housing.  
3. It is recommended that the unitized camera be installed at this time. Connect  
to the quick-release bracket and secure per manufacturer directions.  
8-32 Security  
fastener  
4. Clean the inside of the dome, with the text-wipe provided. Reattach the  
housing dome and secure the (3) captive screws.  
Figure 3  
Do not overtighten the screws. Tighten only to the point at which the gap  
between the ring and the housing top closes.  
6
7
OUTDOOR DOME HOUSINGS  
OUTDOOR DOME HOUSINGS  
 
ETHERNET CONECTION (RJ45 CONNECTOR)  
FOR PENDANT MOUNT VERSIONS  
1. Mount the housing assembly to the mounting bracket and housing coupling. A  
safety cable is included with the housing to temporarily hold it while making  
wiring connections. Loop the safety cable over one of the set screws on the  
housing coupling and make the appropriate connections using the (2) screw-  
down connectors supplied.  
RS232 & Digital Alarms  
10  
11  
12  
13  
14  
15  
RXD (RS232)  
TXD (RS232)  
S1 +  
Blue  
Violet  
Gray  
2. Undo the safety cable and twist the housing onto the housing coupling.  
Secure all (3) setscrews provided on the housing coupling (Figure 4).  
S1 -  
Orange  
Brown  
Tan  
S2 +  
S2 -  
3. Clean the outside of the dome with the text wipe provided.  
WIRING COLOR CODE  
POWER AND CONTROL INPUTS (SPH-20W/P)  
Twist and  
Secure  
Housing (Power 24 VAC)  
1
2
3
4
Accessory Power (24 VAC)  
Yellow  
Green  
Accessory Power (24 VAC)  
N/A  
N/A  
Figure 4  
WIRING COLOR CODE  
Camera (Power 12 VDC)  
POWER AND CONTROL INPUTS (SWH-20W/P)  
1
2
3
4
Camera Power (+12 VDC)  
Red  
Camera Power (Ground)  
SYNC (Camera Power)  
N/A  
Black  
White  
Housing (Power 12 VDC)  
1
2
3
Accessory Power (+12 VDC)  
Accessory Power (Ground)  
N/A  
Red  
Black  
RS-485  
4
N/A  
Camera (Power 12 VDC)  
1
2
3
4
Data +  
Data -  
Ground  
N/A  
Gray  
Violet  
Blue  
1
2
3
4
Camera Power (+12 VDC)  
Red  
Camera Power (Ground)  
SYNC (Camera Power)  
N/A  
Black  
White  
8
9
OUTDOOR DOME HOUSINGS  
OUTDOOR DOME HOUSINGS  
 
EXPLODED VIEWS OF HOUSING  
Wall Mount Assembly (For SPH-20W, SWH-20W)  
Item No. Description  
Part No.  
Qty  
1
1
1
1
1
1
2
6
1
1
3
1
1
4
4
4
3
3
3
3
1
1
2
1
1
2
Wall Mount Bracket Assembly  
Housing Top  
40-BRWM12  
30-VL1697  
30-VL1695  
72-HT2170  
20-DCFD8  
20-DTFD8  
96-RSORG11  
30-VL1696  
1
3
Dome Support Ring  
20W, 12 VDC Heater  
Clear Dome  
4
9
2
n/s  
5
Tinted Dome  
n/s  
6
9.25" O-ring  
Plastic Ring Plugs  
7
8
Upper Housing Bracket  
Housing Gasket  
Housing Fan  
30-VL1744  
96-PSGK05  
71-VLBL03  
9
8
10  
11  
12  
12  
12  
13  
15  
n/s  
n/s  
16  
n/s  
n/s  
n/s  
12  
4
7
1/4 x 20 x .75" HH Bolts  
1/4 Split Lock Washer  
1/4 Flat Washer  
90-BTHH27  
92-WSSL01  
92-WSFL01  
90-BTRP28  
30-VL1749  
92-SPR01  
16  
11  
7
13  
10 x 32 x .75 Phil PH SS  
Captive Screw  
10  
Captive Screw Spring  
Captive Screw Retainer  
Main Housing Bracket  
Housing Ring 1" Lanyard Spring  
Lanyard Spring Screws  
Packet Assembly  
3
94-FSRT04  
30-VL1742  
92-SPR02  
15  
90-BTPEM01  
40-PKFD8  
6
5
10  
11  
OUTDOOR DOME HOUSINGS  
OUTDOOR DOME HOUSINGS  
 
Pendant Assembly (For SPH-20P, SWH-20P)  
MOUNTING TEMPLATE  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
n/s  
n/s  
1/4 x 20 FH SS Bolt  
Housing Pendent Bracket  
1/4 Split Lock Washer  
1/4 Flat Washer  
90-BTSR01  
30-VL926  
1
1
1
1
1
2
4
4
4
1
1
2
2
2
92-WSSL01  
92-WSFL01  
96-PSGK05  
90-BTSS05  
92-WSFL01  
92-WSSL01  
90-BTHH27  
30-VL917  
2.000"  
0.875"  
Housing Gasket  
1/4 x 20 x 1/2" Set Screw  
1/4 Flat Washer  
1/4 Split Lock Washer  
1/4 x 20 x .75" HH Bolts  
1 1/2" Housing Coupling  
Upper Housing Gasket  
1/4 x 20 x .375" HH Bolts  
1/4 Flat Washer  
96-PSGK04  
90-BTHH39  
92-WSFL01  
92-WSSL01  
1.500"  
2.000"  
1/4 Split Lock Washer  
27  
26  
28  
20  
19  
5.500"  
17  
22  
18  
21  
23  
24  
25  
12  
13  
OUTDOOR DOME HOUSINGS  
OUTDOOR DOME HOUSINGS  
 
WARRANTY CARD  
DIMENSIONS  
PRODUCT NAME  
MODEL NAME  
SPEED DOME HOUSING  
NAME  
PHONE  
CUSTOMER  
Wall mount version  
SERIAL NO.  
ADDRESS  
NAME  
16.069"  
WARRANTY PERIOD  
1 YEAR  
PHONE  
DATE  
DEALER  
PURCHASE  
PRICE  
ADDRESS  
Thank you for purchasing this product.  
This warranty is valid only on samsung techwin products by the instructions listed in the rear page within  
warranty period except the periodic replace parts.  
7.942"  
SAMSUNG TECHWIN CO., LTD  
Head office  
:
SAMSUNG TECHWIN CO., LTD  
145-3, Sangdaewon 1-Dong Jungwon-gu, Sungnam  
Kyungki-do, Korea 462-703  
TEL : 82-31-740-8137-8141 FAX : 82-31-740-8145  
4.652"  
Branch office : Samsung Opto Electronics America Inc.  
40 Seaview Drive Secaucus, NJ USA 07094  
TEL : 1-201-902-0347 FAX : 1-201-902-0429  
8.8"  
Instructions  
1. This product has been passed though a strict quality control and inspection.  
2. Any trouble in functions and details of this product will be repaired or replaced free of charge.  
(Although within 1 year, the items in this manual might be replaced at Buyer’s expense.)  
3. This warranty is effective only in this country.  
Pendant mount version  
4. This card should be accompanied when repaired.  
2.250"  
5. This warranty card should not be reissued, keep it in a safe place.  
6. For repair, contact the authorized SAMSUNG products dealer from whom you purchased this  
product.  
1.778"  
For Warranty  
8.893"  
1. Write purchased, let your authorized SAMSUNG PRODUCT dealer fill in the purchased  
information.  
Check the information on the warranty card and keep it in a safe place.  
2. Our products are under manufacture’s liability insurance to ensure the quality assurance.  
3. For the service items listed below, they are replace and repaired at Buyer’s expense (Repairing  
cost + Parts prices + Traffic expenses) although within 1 year after purchasing time.  
Chaneable service iems (The defects caused by followings will be repaired at Buyer’s expense.)  
Careless handling  
Electricity misapplied  
Repaired by user  
Repaired by unauthorized personnel  
Consumable items  
8.8"  
Natural disaster (Fire, Sea Wind, Flood, etc)  
11.417"  
Before Calling Service  
1. please read carefully “Note on use” and “Troubleshooting” on the operation manual.  
2. If any more trouble, stop using and let me know by calling about the model name, symptom,  
purchaser’s information.  
14  
15  
OUTDOOR DOME HOUSINGS  
OUTDOOR DOME HOUSINGS  
 
18  
18  
19  
20  
21  
21  
23  
23  
23  
24  
24  
26  
29  
30  
31  
SPH-20W  
스피드돔 카메라 (SPD-1600, SPD-2500) 용 실외 하우징.  
벽면고정형.  
SPH-20P  
스피드돔 카메라 (SPD-1600, SPD-2500) 용 실외 하우징.  
펜던트형.  
SWH-20W  
벽면 고정형  
펜던트형  
웹스피드돔 카메라 (SWC-160, SWC-250) 용 실외 하우징.  
벽면고정형.  
SWH-20P  
웹스피드돔 카메라 (SWC-160, SWC-250) 용 실외 하우징.  
펜던트형.  
17  
OUTDOOR DOME HOUSINGS  
 
제품을 올바르게 사용하여 위험이나 물적 손해를 미리 방지하기 위한 내용이  
므로 반드시 지켜 주시기 바랍니다.  
1.설명서를 읽으세요-장치를 설치하기전 반드시 모든 안전사항과 설치 설명  
서를 읽어주십시오.  
2.설명서를 보관하세요-향후 참고를 위해 안전사항과 설치 설명서를 보관해  
주십시오.  
3.경고사항에 대해 주의해주세요-장치에 부착되어 있는 모든 경고사항 및 작  
동설명은 반드시 부착되어 있어야 합니다.  
4.설명서대로 따라주세요-설명서에 기재된 사항을 이행해 주십시오.  
5.전기배선-반드시 숙련된 기술자가 전기배선을 시공해야 합니다.  
6.부착물-제조업자가 권장하는 부착물외는 부착하지 마십시오.ꢀ 위험을 유발  
합니다.  
제품내에 사람에게 치명상을 줄수 있는 '위험전압'이 절연되  
지 않은 상태로 존재함을 경고하는 것입니다.ꢀ  
7.배선길이-모든전기배선은 허용거리 이내로 시공되어야 합니다.  
8.설치-본장치는 장치의 무게를 지탱하기 위해 구조물에 단단히 고정되어야  
합니다.ꢀ따라서,  
중요한 동작사항 및 유지보수 사항에 대한 설명서가 제품과  
함께 동봉되어 있으니 참고하라는 표시입니다.  
a.설치는 숙련된 설치업자에 의해 행해져야 합니다.  
b.설치는 지역코드에 따라 행해져야 합니다.  
c.설치표면과 장치의 무게를 고려하여 가장 최적의 설치조건을 찾아야 됩  
니다.ꢀ본장치와 지지구조물을 주기적으로 점검하여 이상유무를 체크하십시  
오.지지구조물이나 장치연결부에 이상이 생겨 장치가 천정에서 떨어지는  
경우 사람이나 주위물건에 치명적인 손상이 가해질 수 있습니다.  
조심해서 포장을 제거하십시오.주의하게 취급하거나 떨어뜨리면 내부 전  
자부품이 손상될 수 있습니다.ꢀ운송중에 제품 손상이 발생하면 Box에 정위치  
시키고 운송업자에게 통보하십시오.  
사후보관 요망품  
1.포장Box와 내부포장재.ꢀ 나중에 제품을 운반할경우 가장 안전한 포장재로  
활용할 수 있습니다.  
2.설치 및 동작 설명서  
18  
19  
OUTDOOR DOME HOUSINGS  
OUTDOOR DOME HOUSINGS  
 
입력전압 :ꢀ하우징 &ꢀ카메라 -DCꢀ12Vꢀ  
DCꢀ12Vꢀ인가시 22Watt  
터 :ꢀ20W  
순환팬 :ꢀ2W  
·
히터는 4 C ( 4 C) 에서 동작하고 16 C ( 4 C) 에서 멈춥니다.  
·
순환팬은 항상 동작합니다.  
1.조심해서 포장재를 제거한후 설명서를 참조하여 결품이 없는지 확인하십시오.  
2.본제품은 1ꢀ1/2"ꢀNPT나사규격에 맞는 나사를 사용하고 있습니다.  
3.벽면고정형 브라켓이나 펜던트파이프에 본체 커플링을 부착하세요.ꢀ(그림1)  
·본제품을 연결해서 사용하시려면,ꢀ1ꢀ1/2"ꢀNTPꢀ나사규격에 준하는 연결 pipe  
를 사용하세요.ꢀ본 제품과 함께 제공되진 않습니다.ꢀ별도로 구매하세요.  
·파이프의 나사산에는 녹이나 이물질이 없어야 됩니다.림방지를 위해 테  
프론 테이프나 실리콘 실러를 사용하세요.  
나사 돌림방지  
테이프를 사용  
하세요.  
(그림1)  
본체의 무게를 지탱하기위해 브라켓은 벽면구조물에 단단히 고정되어야 합  
니다.  
20  
21  
OUTDOOR DOME HOUSINGS  
OUTDOOR DOME HOUSINGS  
 
본 설치는 하우징 설치전에 행해져야 합니다.  
1.벽면고정형 브라켓의 용이한 설치를 위해 템플릿이 제공됩니다.ꢀ우선 설치할  
위치를 정한후 템플릿을 이용하여 드릴구멍을 표시합니다.ꢀ브라켓상단의 2개  
의 구멍에 3/4가량의 볼트(제공되지 않음)를 체결합니다.ꢀ 벽면 밖으로 약  
200mmꢀ길이의 배선을 뽑아내야 합니다.  
1.먼저 투명돔쪽의 하우징링에 체결되어 있는 스크류 3개를 푼후 하우징을 여  
십시오.크류가 완전히 풀려서 빠지지 않도록 주의해야 합니다.명돔과  
하우징링을 조심스럽게 반시계 방향으로 돌린후 하우징을 여십시오.(그림2)  
2.벽면고정판의 스크류를 푼다음 커버를 엽니다.(그림3)  
3.벽면에 체결된 볼트에 본체 브라켓의 상단 홀을 걸친후 벽면고정형 브라켓의  
중앙부 사각홀로부터 배선을 뽑아냅니다.ꢀ 본체 브라켓의 하단 홀에 와셔와  
볼트를 단단히 고정시킵니다.ꢀ본체 브라켓의 상단 홀의 볼트를 제거한후,ꢀ볼  
트에 와셔를 끼우고 단단히 고정시킵니다.ꢀ  
4.배선연결표를 참고하여 벽면으로부터 뽑아낸 배선에 제공된 컨넥터를 부착합  
니다.  
스크류가 완전히 빠  
지지 않도록 풀어주  
세요.  
5.배선연결이 완료되었으면 배선을 본체 브라켓안으로 밀어넣은후 브라켓 커버  
를 닫습니다.ꢀ브라켓 커버 스크류를 다시 체결합니다.ꢀ  
투명돔을 반시계방  
6.제공된 천으로 돔의 외관면을 깨끗이 닦습니다.  
향으로 돌려서 열어  
주세요.  
(그림2)  
컨넥터들은 여기에  
위치 시켜주세요.  
2.팬틸트를 하우징내 원터치조립 브라켓에 조립하십시오.본 설치는 하우징  
설치전에 행해져야 합니다.  
3.이때 카메라본체를 설치하는것이 좋습니다.ꢀ  
카메라본체를 원터치조립 브라켓에 연결한후 사용설명서를 참조하여 단단  
히 고정하십시오.  
8-32ꢀ유니파이나사  
체결구 사용.  
4.제공된 천으로 투명돔 안쪽을 깨끗이 닦습니다.  
투명돔을 조립한후 스크류 3개소를 체결합니다.크류체결시 과도한 힘을  
주지 마세요.ꢀ스크류 체결시 하우징링과 돔커버의 틈새가 없어질 정도만 체  
결하십시오.  
(그림3)  
22  
23  
OUTDOOR DOME HOUSINGS  
OUTDOOR DOME HOUSINGS  
 
1.하우징 본체를 마운팅 브라켓과 커플링에 연결합니다.선연결시 편의를  
위해 일시적으로 하우징본체를 지지하는 안전케이블이 연결되어 있습니다.  
커플링에 체결된 세트스크류에 안전케이블을 걸고 제공된 컨넥터를 사용해  
서 배선연결을 마무리합니다.  
RS232ꢀ통신과 디지털 경보  
10  
11  
12  
13  
14  
15  
RXD (RS232)  
TXD (RS232)  
S1 +  
청색  
자색  
회색  
2.세트스크류에 걸린 안전케이블을 푼 후 하우징 본체를 커플링에 끼운후 돌  
려서 체결합니다.ꢀ 하우징 커플링에 체결된 세트스크류를 단단히 조입니  
다.(그림4)  
S1 -  
주황색  
갈색  
S2 +  
S2 -  
황갈색  
3.제공된 천으로 돔의 외관면을 깨끗이 닦습니다.  
돌려서 체결하세요  
하우징 (전원 24ꢀVAC)  
1
2
3
악세사리 전원 (24 VAC)  
황색  
녹색  
악세사리 전원 (24 VAC)  
N/A  
4
N/A  
(그림4)  
카메라 (전원 12ꢀVDC)  
1
2
3
4
카메라 전원 (+12 VDC)  
적색  
흑색  
백색  
카메라 전원 (Ground)  
동기신호 (카메라 전원)  
N/A  
하우징 (전원 12ꢀVDC)  
1
2
3
악세사리 전원 (+12 VDC)  
악세사리 전원 (Ground)  
적색  
흑색  
RS-485  
N/A  
N/A  
4
1
2
3
4
Data +  
Data -  
Ground  
N/A  
회색  
자색  
청색  
카메라 (전원 12ꢀVDC)  
1
2
3
4
카메라 전원 (+12 VDC)  
적색  
흑색  
백색  
카메라 전원 (Ground)  
동기신호 (카메라 전원)  
N/A  
24  
25  
OUTDOOR DOME HOUSINGS  
OUTDOOR DOME HOUSINGS  
 
벽면고정형 (For SPH-20W, SWH-20W)  
번 호  
1
수량  
1
Wall Mount Bracket Assembly  
Housing Top  
40-BRWM12  
30-VL1697  
30-VL1695  
72-HT2170  
20-DCFD8  
20-DTFD8  
2
1
1
3
Dome Support Ring  
20W, 12 VDC Heater  
Clear Dome  
1
4
1
9
2
n/s  
5
1
Tinted Dome  
1
n/s  
6
9.25" O-ring  
96-RSORG11  
30-VL1696  
2
Plastic Ring Plugs  
6
7
1
8
Upper Housing Bracket  
Housing Gasket  
Housing Fan  
30-VL1744  
96-PSGK05  
71-VLBL03  
1
9
3
8
10  
11  
12  
12  
12  
13  
15  
n/s  
n/s  
16  
n/s  
n/s  
n/s  
1
12  
4
7
1
1/4 x 20 x .75" HH Bolts  
1/4 Split Lock Washer  
1/4 Flat Washer  
90-BTHH27  
92-WSSL01  
92-WSFL01  
90-BTRP28  
30-VL1749  
92-SPR01  
4
16  
11  
4
7
4
13  
10 x 32 x .75 Phil PH SS  
Captive Screw  
3
3
10  
Captive Screw Spring  
Captive Screw Retainer  
Main Housing Bracket  
Housing Ring 1" Lanyard Spring  
Lanyard Spring Screws  
Packet Assembly  
3
3
94-FSRT04  
30-VL1742  
92-SPR02  
3
1
15  
1
90-BTPEM01  
40-PKFD8  
2
6
1
5
26  
27  
OUTDOOR DOME HOUSINGS  
OUTDOOR DOME HOUSINGS  
 
펜던트형 (For SPH-20P, SWH-20P)  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
n/s  
n/s  
1/4 x 20 FH SS Bolt  
Housing Pendent Bracket  
1/4 Split Lock Washer  
1/4 Flat Washer  
90-BTSR01  
30-VL926  
1
1
1
1
1
2
4
4
4
1
1
2
2
2
92-WSSL01  
92-WSFL01  
96-PSGK05  
90-BTSS05  
92-WSFL01  
92-WSSL01  
90-BTHH27  
30-VL917  
50mm  
22mm  
Housing Gasket  
1/4 x 20 x 1/2" Set Screw  
1/4 Flat Washer  
1/4 Split Lock Washer  
1/4 x 20 x .75" HH Bolts  
1 1/2" Housing Coupling  
Upper Housing Gasket  
1/4 x 20 x .375" HH Bolts  
1/4 Flat Washer  
96-PSGK04  
90-BTHH39  
92-WSFL01  
92-WSSL01  
38mm  
50mm  
1/4 Split Lock Washer  
27  
26  
28  
20  
19  
140mm  
17  
22  
18  
21  
23  
24  
25  
28  
29  
OUTDOOR DOME HOUSINGS  
OUTDOOR DOME HOUSINGS  
 
벽면고정형  
408mm  
Speed Dome Housings  
202mm  
118mm  
224mm  
펜던트형  
57mm  
45mm  
226mm  
224mm  
290mm  
30  
31  
OUTDOOR DOME HOUSINGS  
OUTDOOR DOME HOUSINGS  
 
MEMO  
MEMO  
32  
33  
OUTDOOR DOME HOUSINGS  
OUTDOOR DOME HOUSINGS  
 

Radio Shack Answering Machine 43 3803 User Guide
RCA Flat Panel Television HD50LPW52 User Guide
Remington Chainsaw 104316 04, 104316 05, 106890 01, 106890 02, 108526 01, 104317, 106821, 106821A User Guide
Ricoh All in One Printer AP610N User Guide
RIDGID Impact Driver R82320 User Guide
Rotel Cassette Player RD 850 User Guide
Rotel Stereo Receiver RT 935AX User Guide
Samsung Clothes Dryer DV428AEL User Guide
Samsung Clothes Dryer DV435ETGJRA User Guide
Samsung DVR SHR 9716 User Guide