Rolls Mixer MX56C User Guide

OPERATION  
Connect your various devices such as a laptop computer, wireless microphone,  
or other line level devices to Inputs 3 and 4. Remember Channel 4 is MONO,  
and Channel 3 is STEREO.  
Connect a stereo signal source such as a CD player, cassette player, or a video  
player's audio output to Channel 1, and a microphone to Channel 2. If the micro-  
phone requires phantom power, move the phantom power jumper as described  
on the previous page.  
MX56c  
MiniMix A/V  
4-Channel Mixer  
Adjust the levels of each channel for a desired balance of signals. Since the  
MX56c has no master level, you will need to be aware of the setting of your am-  
plifier. Check each mic/source level individually first for proper level, then adjust  
them for a desired mix.  
Rolls Corporation  
Salt Lake City, UT 10/05  
SCHEMATIC  
Owners Manual  
 

QSC Audio Speaker System SC 322X User Guide
Radio Shack Door 63 1124 User Guide
Rangemaster Refrigerator U109200 03 User Guide
RedMax Trimmer LRTZ2401 User Guide
Renesas Network Card M34571T2 CPE User Guide
Roadmaster Speaker VRA10PSW User Guide
Robic Outdoor Timer SC 606 User Guide
Samsung Microwave Oven DE6612 User Guide
Samsung Security Camera SNC B2335P User Guide
Samsung Switch DCS 400si User Guide