Rolls Air Compressor CL151 GLC User Guide

The plug connected to the Tip is the "Send" which will connect to the Input of the signal  
processing device, and the Ring is the "Return" which connects directly to the detector  
(compression control) circuit.  
CL151 GLC  
Compressor/Limiter/  
Gate  
Side Chain circuits are often used in "ducking". Ducking is momentarily lowering one sig-  
nal under another signal. For example, you may wish to automatically lower a music signal  
under a paging microphone signal, then have the music return to normal level after the  
page is over. This would be accomplished by running the music into the compressor, and  
having the page signal connect into the Side Chain return. The page signal must also be  
connected to the main mixer or amplifier as well. When the paging signal begins, its signal  
goes to the main mixer and the Side Chain circuitry. The music is compressed or "ducked"  
under the page  
SCHEMATIC  
SPECIFICATIONS  
Max Input:  
XLR: -10 dBm Balanced  
1/4": +14 dBV Balanced  
+14 dBV Balanced  
-72 dBV, Out Level Min, Gate Off  
12 VDC  
10 Hz - 30 kHz, +0 -3 dB  
150 mS - 1 S  
5 mS  
5 mS  
800 mS  
Max Out:  
Noise Floor:  
Phantom Power:  
Frequency Response:  
Gate Release Time:  
Gate Attack Time:  
Comp Attack Time:  
Comp Release Time:  
Power:  
12 VDC 150 mA adapter (center negative)  
1 lbs. (.45 Kg)  
Weight:  
ROLLS CORPORATION  
SALT LAKE CITY, UTAH  
1/04  
Size:  
4.15" x 2.46" x 1.55"  
USER GUIDE  
 

Radio Shack GPS Receiver 20 199 User Guide
Radio Shack Washer 49 1010 User Guide
RIDGID Blower WD1665 User Guide
Rotel Computer Drive RDD 980 User Guide
Rowenta Fan VA360 User Guide
Ryobi Sander BE318 User Guide
Samsung Digital Camera U CA 3 User Guide
Samsung Washer SW81ASP User Guide
Sanyo Flat Panel Television CE52FD86N B User Guide
Senco Nail Gun SN951XP User Guide