Renesas Network Card M3T F160 128NRD User Guide

M3T-F160-128NRD  
Converter Board for Connecting FLX160 to 128-pin 0.5-mm-pitch LQFP  
User's Manual  
Keep safety first in your circuit designs!  
• Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more  
reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property  
damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive,  
auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.  
Notes regarding these materials  
• These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to the customer's  
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation,  
Renesas Solutions Corporation or a third party.  
• Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of any third-party's rights,  
originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.  
• All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the  
time of publication of these materials, and are subject to change by Renesas Technology Corporation and Renesas Solutions Corporation without notice  
due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation, Renesas Solutions  
Corporation or an authorized Renesas Technology product distributor for the latest product information before purchasing a product listed herein. The  
information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions  
Corporation assume no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information  
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home page (http://  
www.renesas.com).  
• When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure  
to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology  
Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability or other loss resulting from the information contained herein.  
• Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human  
life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product  
distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular,  
medical, aerospace, nuclear, or undersea repeater use.  
• The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or reproduce in whole or in part  
these materials.  
• If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese  
government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and  
regulations of Japan and/or the country of destination is prohibited.  
• Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the products contained therein.  
Precautions to be taken when using this product  
• This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your program you have  
finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing integration test, evaluation, or some  
experiment else.  
• In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.  
• Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge. However, this does  
not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any circumstances.  
• This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not fall under the  
application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when used in Japan.  
If the requirements shown in the "CAUTION" sentences are ignored,  
the equipment may cause personal injury or damage to the products.  
CAUTION  
Rev. 1.00  
July 1, 2003  
REJ10J0233-0100Z  
 
5. Connection Procedure (See Figure 3)  
The procedure for connecting the M3T-F160-128NRD is  
shown below.  
(1) Mount the NQPACK128RD on the target system.  
(2) Attach the YQPACK128RD on the NQPACK128RD.  
FLX160-PRB  
or  
M3xxxxTx-EPB  
(3) Secure the four corners of the YQPACK128RD with the  
YQ-GUIDE's.  
• Do NOT use the screws included with the  
YQPACK128RD.  
M3T-F160-128NRD  
• Do NOT use the screwdriver included with the  
NQPACK128RD that is used only for the  
HQPACK128RD.  
Use a slotted screwdriver.  
(4) Attach the probe of the emulation pod to the M3T-F160-  
128NRD.  
YQ-GUIDE's (x4)  
YQPACK128RD  
(5) Attach the M3T-F160-128NRD on the YQPACK128RD.  
NQPACK128RD  
128-pin 0.5-mm-pitch  
(128P6Q-A) foot pattern  
: Position of No. 1 pin  
Be sure to align the pins.  
Figure 3 Connection procedure  
6. External Dimensions and a Sample Foot Pattern  
Unit: mm  
Figure 4 External dimensions and a sample foot pattern  
( 3 / 4 )  
 
7. Precautions  
CAUTION  
Cautions to Be Taken for This Product:  
• To connect the YQPACK128RD, be sure to use the included YQ-GUIDE's.  
• Do NOT use the screws included with the YQPACK128RD in order to connect the  
YQPACK128RD.  
IMPORTANT  
Notes on This Product:  
• We cannot accept any request for repair.  
• For purchasing the NQPACK128RD, YQPACK128RD, HQPACK128RD, contact  
the following:  
• For inquiries about the product or the contents of this manual, contact your local  
distributor.  
Renesas Tools Homepage http://www.renesas.com/en/tools  
8. Correspondence of the Connectors CN1 and CN2  
Table 2 Correspondence of the connectors  
CN1  
1a  
IC1  
-
CN1  
1b  
IC1  
16  
14  
12  
-
CN2  
1a  
IC1  
-
CN2  
1b  
IC1  
17  
19  
21  
23  
25  
27  
29  
31  
33  
-
35  
37  
39  
41  
43  
45  
47  
49  
51  
-
2a  
15  
13  
11  
-
2b  
2a  
18  
20  
22  
24  
26  
28  
30  
32  
34  
-
36  
38  
40  
42  
44  
46  
48  
50  
52  
-
54  
55  
56  
58  
60  
62  
64  
66  
68  
-
2b  
3a  
3b  
3a  
3b  
4a  
4b  
4a  
4b  
5a  
5b  
-
5a  
5b  
6a  
-
6b  
-
6a  
6b  
7a  
10  
8
7b  
9
7a  
7b  
8a  
8b  
7
8a  
8b  
9a  
6
9b  
5
9a  
9b  
10a  
11a  
12a  
13a  
14a  
15a  
16a  
17a  
18a  
19a  
20a  
21a  
22a  
23a  
24a  
25a  
26a  
27a  
28a  
29a  
30a  
31a  
32a  
33a  
34a  
35a  
36a  
37a  
38a  
39a  
40a  
4
10b  
11b  
12b  
13b  
14b  
15b  
16b  
17b  
18b  
19b  
20b  
21b  
22b  
23b  
24b  
25b  
26b  
27b  
28b  
29b  
30b  
31b  
32b  
33b  
34b  
35b  
36b  
37b  
38b  
39b  
40b  
-
10a  
11a  
12a  
13a  
14a  
15a  
16a  
17a  
18a  
19a  
20a  
21a  
22a  
23a  
24a  
25a  
26a  
27a  
28a  
29a  
30a  
31a  
32a  
33a  
34a  
35a  
36a  
37a  
38a  
39a  
40a  
10b  
11b  
12b  
13b  
14b  
15b  
16b  
17b  
18b  
19b  
20b  
21b  
22b  
23b  
24b  
25b  
26b  
27b  
28b  
29b  
30b  
31b  
32b  
33b  
34b  
35b  
36b  
37b  
38b  
39b  
40b  
-
3
2
1
128  
126  
124  
122  
120  
119  
118  
116  
-
127  
125  
123  
121  
-
-
117  
-
115  
113  
111  
109  
-
-
-
106  
104  
-
102  
100  
98  
96  
94  
92  
90  
88  
86  
-
53  
-
-
114  
112  
110  
108  
-
57  
59  
61  
63  
65  
67  
-
69  
70  
71  
73  
75  
77  
79  
81  
83  
-
-
107  
105  
103  
-
101  
99  
97  
95  
93  
91  
89  
87  
85  
-
-
72  
74  
76  
78  
80  
82  
84  
("-": No connection)  
( 4 / 4 )  
 

Radio Shack Digital Camera 16 3898 User Guide
Radio Shack Motorized Toy Car 60 440 User Guide
Radio Shack Scanner PRO 2048 User Guide
RIDGID Impact Driver R82320 User Guide
Sagem Modem N56815740110 User Guide
Samsung Cell Phone GH68 06085A User Guide
Samsung DVR SHR 3040 User Guide
Seagate Automobile Accessories ST9100822A User Guide
Sears Portable Generator APG3004A User Guide
Sennheiser Camcorder MZQ 30 User Guide