Radio Shack Cassette Player CD 3319 User Guide

14-543.fm Page 1 Wednesday, June 30, 1999 3:52 PM  
Cat. No. 14-543  
OWNER’S MANUAL  
Please read before using this equipment.  
CD-3319  
Portable Triple Play Compact Disc Player  
and AM/FM Stereo Cassette Recorder  
 
14-543.fm Page 3 Wednesday, June 30, 1999 3:52 PM  
Auxiliary Input Jacks — let you con-  
nect an additional audio source such  
as a TV, VCR, turntable, external CD  
changer or a cassette deck to your  
system.  
Warnings:  
• This system employs a laser light  
beam. Only a qualified service  
person should remove the cover  
or attempt to service this device,  
due to possible eye injury.  
For your records, we recommend you  
record the serial number of the CD-  
3319 in the space provided. The serial  
number is in the battery compartment.  
• The use of controls, adjustments,  
or procedures other than those  
specified herein may result in haz-  
ardous radiation exposure.  
Serial Number __________________  
Warning: To prevent fire or shock  
hazard, do not expose this product to  
rain or moisture.  
The CD player in this stereo system is  
made and tested to meet exacting  
safety standards. It meets UL and  
FCC requirements and complies with  
safety performance standards of the  
U.S. Department of Health and Hu-  
man Services. With proper care, this  
CD player should give you years of  
trouble-free service.  
CAUTION  
RISK OF ELECTRIC SHOCK.  
!
DO NOT OPEN.  
CAUTION: TO REDUCE THE RISK OF  
ELECTRIC SHOCK, DO NOT REMOVE  
COVER OR BACK. NO USER-SERVICE-  
ABLE PARTS INSIDE. REFER SERVIC-  
ING TO QUALIFIED PERSONNEL.  
CDs that can be  
played on this  
player have this  
mark on them:  
This symbol is intended to alert you  
to the presence of uninsulated dan-  
gerous voltage within the product’s  
enclosure that might be of sufficient  
magnitude to constitute a risk of  
electric shock. Do not open the  
product’s case.  
Note: Most material on compact discs  
and pre-recorded tapes is copyright-  
ed. Unauthorized duplication of copy-  
righted material is a violation of the  
copyright laws of most countries and  
such duplication may result in fines  
and/or imprisonment. Note, however,  
that in the United States, it is not a vio-  
lation of U.S. copyright laws for a con-  
sumer to use an audio recording  
device to duplicate musical recordings  
for noncommercial (personal) use.  
This symbol is intended to inform  
you that important operating and  
maintenance instructions are in-  
cluded in the literature accompany-  
ing this product.  
!
3
 
14-543.fm Page 4 Wednesday, June 30, 1999 3:52 PM  
CONTENTS  
Preparation ........................................................................................................... 5  
Connecting the Speakers ................................................................................ 5  
Attaching the Speakers ............................................................................. 5  
Connecting the Speaker Wires ................................................................. 6  
Connecting an Auxilary Audio Source ............................................................. 6  
Connecting Power ........................................................................................... 7  
Using AC Power ........................................................................................ 7  
Using Batteries .......................................................................................... 7  
Using Your Vehicle’s Battery ..................................................................... 8  
Using Headphones .......................................................................................... 9  
Listening Safely ......................................................................................... 9  
Traffic Safety ............................................................................................. 9  
Radio Operation ................................................................................................. 10  
CD Player Operation .......................................................................................... 11  
Loading a CD ................................................................................................. 11  
Playing a CD .................................................................................................. 11  
Programming Tracks ..................................................................................... 12  
Storing/Playing a Programmed Sequence .............................................. 12  
Checking a Programmed Sequence ....................................................... 13  
Erasing a Programmed Sequence .......................................................... 13  
Special CD Player Features .......................................................................... 14  
Automatic Search Music System (ASMS) ............................................... 14  
Audible Search ........................................................................................ 14  
Repeat Play ............................................................................................ 15  
Intro Play ................................................................................................. 15  
Shuffle Play ............................................................................................. 15  
CD Care Tips ................................................................................................. 16  
Cassette Player Operation ................................................................................ 17  
Loading a Cassette Tape ............................................................................... 17  
Playing a Cassette Tape ................................................................................ 17  
Recording on a Cassette Tape ...................................................................... 18  
Recording from a CD .............................................................................. 18  
Recording from the Radio ....................................................................... 19  
Recording from an Auxiliary Audio Source .............................................. 19  
Tape Care Tips .............................................................................................. 20  
Preventing Accidental Erasure ................................................................ 20  
Erasing a Cassette Tape ......................................................................... 20  
Restoring Tape Tension and Sound Quality ............................................ 20  
Care and Maintenance ....................................................................................... 21  
FCC Information ............................................................................................ 22  
Cleaning the Tape-Handling Parts ................................................................. 22  
Specifications ..................................................................................................... 23  
4
 
14-543.fm Page 5 Wednesday, June 30, 1999 3:52 PM  
PREPARATION  
Important:  
Place the speakers so the distance  
between them is the same as the dis-  
tance between the listening area and  
a point halfway between the speakers.  
If the distance between the speakers  
is greater, you can improve the stereo  
effect by angling the speakers in to-  
ward the listening area.  
• Complete all connections to the  
CD-3319 before you connect it to  
power.  
• Be sure to follow all of the installa-  
tion instructions described in the  
enclosed “Important Safety In-  
structions.”  
CONNECTING THE  
SPEAKERS  
Attaching the Speakers  
To attach the supplied speakers to the  
CD-3319, slide each speaker down  
into the grooves on each side of the  
CD-3319 until it clicks.  
To increase the bass effect, place the  
speakers in corners, against the wall,  
or directly on the floor. To decrease  
the bass effect, move the speakers  
slightly away from the wall, or raise  
them 6 or more inches off the floor.  
You can purchase speaker stands at  
your local Radio Shack store.  
To detach each speaker, press and  
hold the speaker’s locking latch away  
from the CD-3319, then lift the speak-  
er straight up.  
Note: If you want to connect speakers  
other than the supplied ones, use  
speakers with an impedance of 4  
ohms.  
5
 
14-543.fm Page 6 Wednesday, June 30, 1999 3:52 PM  
Connecting the Speaker  
Wires  
CONNECTING AN  
AUXILIARY AUDIO  
SOURCE  
Follow these steps to connect the  
speaker wires to the CD-3319.  
To connect an auxiliary audio source  
to your CD-3319, such as a TV or  
VCR, plug the audio source’s left and  
right line level audio wires into AUX L  
(left) and AUX R (right).  
1. Unwind as much speaker wire as  
you need from the back of each  
speaker, then slide the wire  
through one of the slots on the  
back of each speaker to hold it in  
place.  
Set FUNCTION to AUX to select and  
listen to an auxiliary audio source.  
2. Insert the left speaker’s plug into  
SPEAKER L on the back of the  
CD-3319, then insert the right plug  
into SPEAKER R.  
Note: Be sure to match the posi-  
tive side of the plug to the positive  
side of the terminal, and the nega-  
tive side to the negative.  
6
 
14-543.fm Page 7 Wednesday, June 30, 1999 3:52 PM  
Using Batteries  
CONNECTING POWER  
You can power the CD-3319 from nine  
D batteries (not supplied). For the best  
results, we recommend alkaline batter-  
ies (such as Radio Shack Cat. No. 23-  
550).  
You can power the CD-3319 from any  
of the following:  
• AC power using the supplied AC  
power cord  
• Nine D batteries (not supplied)  
• Vehicle battery power using a DC-  
to-AC inverter (not supplied)  
Using AC Power  
To power the CD-3319 from standard  
AC power, plug the supplied AC pow-  
AC IN~  
er cord into the  
jack, then plug  
the other end into a standard AC out-  
let.  
1. Press the two latches on the bat-  
tery compartment cover and pull  
out the cover to remove it.  
2. Place the nine D batteries in the  
compartment as indicated by the  
polarity symbols (+ and –) marked  
next to the battery compartment.  
Cautions:  
• Use only fresh batteries of the  
required size and type.  
Caution: The supplied AC power cord  
has a polarized plug that fits into the  
outlet only one way. If the plug does  
not fit properly, turn it over and try  
again. Do not force it.  
• Never mix old with new batter-  
ies.  
• If you do not plan to use the  
batteries in the CD-3319 for a  
month or more, remove the bat-  
teries to protect the CD-3319  
from possible battery leakage.  
Note: The CD-3319 automatically dis-  
connects internal batteries when you  
connect the AC power cord.  
7
 
14-543.fm Page 8 Wednesday, June 30, 1999 3:52 PM  
3. Replace the battery compartment  
cover.  
meet these specifications could  
damage the CD-3319.  
Cautions:  
• If the CD-3319 does not operate  
properly or if the sound weakens  
or distorts, replace the batteries.  
• Always dispose of the old batter-  
ies promptly and properly.  
• Never leave dead, old, or weak  
batteries in the CD-3319. They  
can leak chemicals and corrode or  
damage electronic circuits.  
1. Plug the supplied power cord into  
AC IN~  
the  
CD-3319.  
jack on the back of the  
Using Your Vehicle’s Battery  
You can power the CD-3319 from  
your vehicle’s battery using a DC-to-  
AC inverter (Cat. No. 22-132, not sup-  
plied).  
2. Plug the AC power cord into the  
power inverter’s AC jack.  
3. Plug the power inverter into your  
vehicle’s cigarette lighter socket.  
Cautions:  
4. Turn on the power inverter.  
To protect your vehicle’s electrical  
system, always plug the AC power  
Note: If the CD-3319 does not oper-  
ate properly when you use the invert-  
er, unplug the inverter from the  
cigarette lighter socket and clean the  
socket to remove ashes and debris.  
Also, check the AC power cord for  
proper connection. If it still does not  
operate properly, check the fuse in the  
inverter.  
AC IN~  
cord into  
and the inverter  
before you plug the inverter into  
the cigarette lighter socket.  
Always turn off the inverter and  
unplug it from the cigarette lighter  
socket before you unplug the AC  
AC IN~  
power cord from  
inverter.  
and the  
• The recommended inverter sup-  
plies 120 volts AC power and  
delivers at least 315 milliamps.  
Using an inverter that does not  
8
 
14-543.fm Page 9 Wednesday, June 30, 1999 3:52 PM  
Listening Safely  
USING HEADPHONES  
To protect your hearing, follow these  
guidelines when you use headphones.  
For private listening, you can connect  
a pair of stereo headphones (not sup-  
plied) with a /8-inch plug. Your local  
Radio Shack store carries a wide se-  
lection of stereo headphones.  
1
• Set the volume to the lowest set-  
ting before you begin listening.  
After you begin listening, adjust  
the volume to a comfortable level.  
To connect the headphones, insert the  
headphones’ 1/8-inch plug into the  
• Do not listen at extremely high  
volume levels. Extended high-  
volume listening can lead to  
permanent hearing loss.  
PHONES  
jack.  
• Once you set the volume, do not  
increase it. Over time, your ears  
adapt to the volume level, so a  
volume level that does not cause  
discomfort might still damage your  
hearing.  
Traffic Safety  
Note: Connecting headphones auto-  
matically disconnects the built-in  
speaker.  
Do not wear headphones while oper-  
ating a motor vehicle or riding a bicy-  
cle. This can create a traffic hazard  
and is illegal in some areas.  
Even though some headphones are  
designed to let you hear some outside  
sounds when listening at normal vol-  
ume levels, they still present a traffic  
hazard.  
9
 
14-543.fm Page 10 Wednesday, June 30, 1999 3:52 PM  
RADIO OPERATION  
Warning: To protect your hearing, set  
VOLUME to its lowest setting before  
you turn on the radio.  
Notes:  
• For the best AM reception,  
rotate the CD-3319 to position  
the built-in AM antenna.  
Follow these steps to use the radio.  
• For the best FM reception, fully  
extend the telescoping an-  
tenna and swivel it to the posi-  
tion that produces the best  
reception.  
1. Set FUNCTION to RADIO to turn on  
the radio. The POWER indicator  
lights.  
• The FM STEREO indicator  
lights when you receive an FM  
signal in stereo.  
• If FM stereo reception is noisy,  
set MODE/BEAT-CUT to MONO.  
The sound is no longer in ste-  
reo, but reception should  
improve.  
2. Set BAND to FM or AM.  
5. Adjust VOLUME, TONE and BAL-  
ANCE to the desired levels.  
3. Adjust TUNING to the desired sta-  
tion.  
6. Press E-BASS to enhance the  
bass sounds while playing the  
radio. Press the button again to  
turn the extended bass system off.  
4. Set MODE/BEAT-CUT to STEREO  
(0 or 1) for stereo sound on FM  
stations.  
7. Set FUNCTION to TAPE to turn off  
the radio.  
10  
 
14-543.fm Page 11 Wednesday, June 30, 1999 3:52 PM  
CD PLAYER OPERATION  
LOADING A CD  
PLAYING A CD  
1. Set FUNCTION to CD. The  
POWER indicator lights, and  
dISC appears in the display.  
1. After loading a CD, press PLAY/  
PAUSE  
the CD starting with the first track.  
The display shows , the cur-  
. The CD player plays  
rent track number, and the  
elapsed time.  
2. Press  
PUSH OPEN on the CD  
compartment cover. The CD com-  
partment opens.  
Notes:  
To repeat, skip over, or search  
for tracks, see “Special CD  
Player Features.”  
• A sudden shock or jolt while a  
CD is playing might suddenly  
change the CD’s rotation speed  
or cause the CD player to skip  
the track it is playing and, as a  
result, mute or distort the sound  
momentarily. This is not a mal-  
function.  
3. Place a CD in the compartment  
with the label facing up.  
2. Adjust VOLUME, TONE and BAL-  
ANCE to the desired levels.  
4. Close the compartment door.  
Within a few seconds, the display  
shows the CD’s total number of  
tracks and total playing time.  
11  
 
14-543.fm Page 12 Wednesday, June 30, 1999 3:52 PM  
Warning: Your CD-3319 CD  
player has a wide dynamic range.  
If you turn the volume too high  
during the low volume sections of  
a program, you might damage  
your hearing during sudden loud  
sections.  
Note: If you do not stop the CD  
player, it plays to the end of the  
last track and automatically stops.  
When the CD player is stopped,  
disappears from the display  
and the total number of tracks  
appears.  
E-BASS  
PUSH  
after the CD stops turning.  
3. Press  
to enhance the  
6. To remove the CD, press  
OPEN  
bass sounds while playing the CD.  
Press the button again to turn it  
off.  
Caution: Remove a loaded CD before  
you move the CD-3319 to prevent  
possible damage to the CD or the CD  
player.  
PROGRAMMING  
TRACKS  
4. To temporarily stop play, press  
Storing/Playing a  
Programmed Sequence  
PLAY/PAUSE  
.
appears on  
PLAY/PAUSE  
the display. Press  
again to resume play.  
You can program the CD player to play  
up to 16 tracks in any order you  
choose.  
STOP/  
1. If a CD is playing, press  
CLEAR  
to stop it. The CD’s total  
number of tracks and total playing  
time appear on the display.  
PROGRAM  
PROGRAM  
2. Press  
.
and 00  
5. To completely stop play, press  
STOP/CLEAR  
P- 01(the first memory position)  
.
appear on the display.  
12  
 
14-543.fm Page 13 Wednesday, June 30, 1999 3:52 PM  
3. Select the track you want by  
Checking a Programmed  
Sequence  
pressing SKIP/SEARCH  
or  
.
The track number you  
selected appears on the display.  
To check the programmed sequence,  
while the CD is stopped, repeatedly  
press PROGRAM. The display shows  
each stored track number.  
4. Press PROGRAM. The selected  
track is stored, and the next pro-  
gram number appears on the dis-  
play.  
5. Repeat Steps 3 and 4 to store up  
to 16 tracks.  
Notes:  
• You can store the same track  
more than once.  
Erasing a Programmed  
Sequence  
• When 16 tracks are pro-  
grammed, C -01and the first  
track’s number appear on the  
display.  
Any of the following will erase a pro-  
grammed sequence:  
6. To complete programming and  
play the programmed sequence,  
PROGRAM  
• Press STOP/CLEAR  
until  
clears from the display and the  
CD’s total number of tracks and  
playing time appear.  
press PLAY/PAUSE  
player begins playing the first  
track of the programmed  
. The CD  
sequence. The display shows the  
play indicator, the current track  
number, and the current track’s  
elapsed playing time.  
• Press STOP/CLEAR  
press PUSH OPEN after the CD  
stops turning.  
.
Then  
• Set FUNCTION to another position.  
• Disconnect the power source.  
Notes:  
• Programming is not completed  
until you press PLAY/PAUSE  
.
To repeat, skip over, or search for  
tracks, see “Special CD Player  
Features.”  
13  
 
14-543.fm Page 14 Wednesday, June 30, 1999 3:52 PM  
rest of the last track and begins  
playing the first track.  
SPECIAL CD PLAYER  
FEATURES  
To select a track while the CD player  
is stopped or during pause, press  
Automatic Search Music  
System (ASMS)  
SKIP/SEARCH  
or  
until the  
desired track number appears on the  
You can use ASMS to search through  
the CD to select a desired track or  
programmed sequence.  
PLAY/PAUSE  
display. Then press  
to play the track.  
Audible Search  
While playing any track on a CD, you  
SKIP/  
can press and hold down  
SEARCH  
or  
to search  
through the track to find a desired sec-  
tion. You hear the music at a higher  
speed and lower volume while the CD  
player searches.  
To select a track during play:  
SKIP/SEARCH  
• Press and release  
to return to the beginning of  
the current track.  
SKIP/SEARCH  
• Press and release  
to skip forward to the begin-  
ning of the next track.  
SKIP/SEARCH  
• Repeatedly press  
or to skip backward or  
forward through additional tracks.  
SKIP  
• Press and hold down  
/
SEARCH  
for forward search.  
Notes:  
• If you repeatedly press  
SKIP/  
• Press and hold down  
SEARCH  
SKIP/  
for reverse search.  
SEARCH  
while the first track  
is playing, the last track begins  
playing.  
SKIP/  
To resume normal play, release  
SEARCH  
.
or  
SKIP/  
• If you repeatedly press  
SEARCH  
while the last track  
is playing, the CD-3319 skips the  
14  
 
14-543.fm Page 15 Wednesday, June 30, 1999 3:52 PM  
Note: Intro play does not work with a  
programmed sequence.  
Repeat Play  
You can repeat a single track, the en-  
tire CD, or a programmed sequence.  
While the CD player is stopped, press  
INTRO  
MODE until  
appears on the dis-  
To repeat a single track, press  
MODE before or during play.  
appears on the display and the  
CD player repeatedly plays the  
selected track.  
play. Then press PLAY/PAUSE  
The CD player plays the first 10 sec-  
onds of each track.  
.
REPEAT  
After it plays the first 10 seconds of  
the last track during intro play, the CD  
player stops playing and the display  
shows the total number of tracks and  
the total playing time.  
To repeat the entire CD, press  
MODE twice before or during play.  
REPEAT  
ALL  
appears on the display,  
and the CD player repeatedly  
plays the entire CD.  
During intro play, if you want to listen  
to a specific track within 10 seconds  
after it begins playing, press PLAY/  
To repeat a programmed se-  
quence, press MODE twice before  
or during programmed play.  
PAUSE  
again to turn off intro play  
and resume normal play.  
PROGRAM  
REPEAT  
ALL  
and  
appear on  
the display and the CD player  
repeatedly plays the programmed  
sequence.  
Shuffle Play  
During shuffle play, the CD player  
plays all the tracks on a CD once, se-  
lecting them in random order.  
To cancel repeat play at any time,  
REPEAT  
REPEAT  
ALL  
press MODE until  
or  
disappears from the display.  
Notes:  
Intro Play  
• None of the tracks are played  
more than once.  
During intro play, the CD player scans  
through all the CD’s tracks, playing  
the first 10 seconds of each track.  
• Shuffle play does not work with a  
programmed sequence or repeat  
play.  
15  
 
14-543.fm Page 16 Wednesday, June 30, 1999 3:52 PM  
• You must select shuffle play  
before playback. If you select  
shuffle play while a CD is playing,  
• Keep CDs dry. A water drop can  
act as a lens and affect the laser  
beam’s focus.  
SHUFFLE  
appears on the display but  
• Always handle a CD by the edges  
to avoid getting fingerprints on the  
CD and always keep it in its pro-  
tective case or sleeve when not in  
use. Fingerprints and scratches  
on the CD’s surface can prevent  
the laser beam from correctly  
reading the digital information. To  
clean the CD surface, use a CD  
Cleaner Kit (such as Cat. No. 42-  
225).  
the function does not work.  
SHUFFLE  
Before play, press MODE until  
appears on the display. Then press  
PLAY/PAUSE  
. The CD player se-  
lects and plays each of the tracks ran-  
domly. After all of the tracks have  
played once, the CD player automati-  
cally stops.  
• If you move the player from a cold  
place to a warmer one, moisture  
might condense on the pickup  
lens, preventing proper disc play.  
If this happens, wait 2 hours  
before attempting to operate it  
again.  
CD CARE TIPS  
Even though a compact disc is very  
durable, treat the CD surface with  
care. We recommend the following  
precautions:  
• Do not place anything but a CD in  
the disc tray. This can damage the  
drive mechanism.  
• Do not write on either side of the  
CD, particularly the non-label  
side. (Signals are read from the  
non-label side.)  
• Do not store CDs in high-tempera-  
ture, high-humidity locations. The  
CDs might warp.  
16  
 
14-543.fm Page 17 Wednesday, June 30, 1999 3:52 PM  
CASSETTE PLAYER OPERATION  
LOADING A CASSETTE  
TAPE  
Note: Take up any slack in the tape  
by turning the cassette’s hub with a  
pencil. If you do not remove excess  
slack, the tape might become tangled  
in the record/playback mechanism.  
Avoid touching the tape.  
3. Close the cover.  
PLAYING A CASSETTE  
TAPE  
1. Set FUNCTION to TAPE.  
1. Press STOP/EJECT  
to open  
the cassette compartment cover.  
2. Load a cassette tape.  
3. Press PLAY  
. The POWER indi-  
cator lights and the tape player  
plays the cassette tape until it  
reaches the end, then it automati-  
cally stops.  
2. Insert the cassette tape into the  
tape guides on the compartment  
door, with the side you want to  
play facing you and the exposed  
tape edge facing down.  
Notes:  
To temporarily stop playback,  
press PAUSE  
. Press PAUSE  
again to resume playback.  
17  
 
14-543.fm Page 18 Wednesday, June 30, 1999 3:52 PM  
To rapidly wind the tape forward  
RECORDING ON A  
CASSETTE TAPE  
or backward, press FAST-F  
or REWIND  
. The cassette  
deck automatically stops at the  
end of the tape.  
You can record from the CD player,  
the radio, or an auxiliary audio source  
to a cassette tape.  
Notes:  
• Before recording, be sure the  
erase-protection tabs are in place  
on the cassette tape you are  
recording onto (see “Preventing  
Accidental Erasure”).  
• Be sure the cassette player is  
stopped before fast-forwarding  
or rewinding a cassette tape.  
Tape quality greatly affects the  
quality of the recording. We rec-  
ommend regular length (60- or 90-  
minute) cassette tapes. We do not  
recommend long-play cassette  
tapes such as C-120s because  
they are thin and easily tangle.  
For low-noise, wide-range record-  
ings, use normal-bias tape.  
• Always remove and store cas-  
sette tapes when you are not  
using them.  
4. Adjust VOLUME, TONE and BAL-  
ANCE to the desired levels.  
5. Press E-BASS to turn on the  
extended bass system. Press the  
button again to turn it off.  
• The CD-3319’s Automatic Level  
6. To manually stop play, press  
Control  
(ALC)  
automatically  
STOP/EJECT  
indicator turns off. Press STOP/  
EJECT again to open the cas-  
. The POWER  
adjusts the recording level. VOL-  
UME, TONE and BALANCE have  
no effect on recording.  
sette compartment and remove  
the tape.  
Recording from a CD  
1. Set FUNCTION to CD and load a  
CD. The POWER indicator lights.  
2. Insert a cassette tape.  
18  
 
14-543.fm Page 19 Wednesday, June 30, 1999 3:52 PM  
3. If you are not starting from track 1,  
select the desired track or pro-  
gram a sequence (if you do not  
want to record the entire CD),  
then press PLAY/PAUSE  
twice to pause the CD player.  
appears.  
5. Press RECORD to begin record-  
ing.  
You might hear a low-  
Note:  
volume tone from the CD-3319’s  
speakers during playback after  
you record an AM radio program.  
To insure a tone-free recording,  
make a test recording before you  
record the desired program. If you  
hear the tone in the test recording,  
set MODE/BEAT-CUT on the back  
of the CD player to whichever  
position gives you the best  
recorded sound.  
4. Press RECORD  
on the tape  
deck. RECORD  
and PLAY  
lock down, the CD player auto-  
matically begins playing the first  
track, and the tape deck begins  
recording from the CD.  
and  
SYNC  
appear on the display.  
If you use a cassette  
6. To stop recording, press STOP/  
Caution:  
tape with the erase-protection  
tabs removed, do not force down  
RECORD . This can damage the  
record mechanism. See “Prevent-  
ing Accidental Erasure.”  
EJECT  
.
Recording from an Auxiliary  
Audio Source  
To temporarily stop record-  
Note:  
1. Set FUNCTION to AUX. The  
ing, press PAUSE  
.
Press  
POWER indicator lights.  
PAUSE  
again to resume re-  
2. Insert a cassette tape.  
cording.  
3. Connect an auxiliary audio source  
and start playing the selection you  
want to record.  
5. To stop recording, press STOP/  
EJECT . To stop the CD  
player, press STOP/CLEAR  
.
4. Press RECORD to begin record-  
ing.  
Recording from the Radio  
5. To stop recording, press STOP/  
1. Set FUNCTION to RADIO. The  
EJECT  
.
POWER indicator lights.  
2. Insert a cassette tape.  
3. Set BAND to FM or AM.  
4. Adjust TUNING to the station you  
want to record.  
19  
 
14-543.fm Page 20 Wednesday, June 30, 1999 3:52 PM  
Erasing a Cassette Tape  
TAPE CARE TIPS  
If you no longer want a recording, you  
can record over it or erase it.  
Preventing Accidental  
Erasure  
To erase a previously recorded tape,  
you can either:  
Cassette tapes have two erase-  
protection tabs — one for each side.  
To protect a recording from being ac-  
cidentally recorded over or erased,  
use a screwdriver to remove one or  
both of the cassette tape’s erase-pro-  
tection tabs.  
FUNC-  
• Record silence by setting  
TION  
TAPE  
CD  
or (with no CD  
to  
RECORD  
loaded) and press  
the tape deck.  
on  
• Use a bulk tape eraser (such as  
Radio Shack Cat. No. 44-232, not  
supplied) available at your local  
Radio Shack store.  
Restoring Tape Tension and  
Sound Quality  
After you play a cassette tape several  
times, the tape might become tightly  
wound on the reels. This can cause  
playback sound quality to deteriorate.  
Notes:  
• If you want to record over a tape  
side after you have removed the  
erase-protection tab, place  
a
piece of strong plastic tape over  
that side’s erase-protection hole.  
To restore the sound quality, fast-  
forward the tape from the beginning to  
the end of one side, then completely  
rewind it. Then loosen the tape reels  
by gently tapping each side of the cas-  
sette’s outer shell on a flat surface.  
Caution: Be careful not to damage  
the cassette when tapping it. Do not  
touch the exposed tape or allow any  
sharp objects near the cassette.  
• Removing the erase-protection  
tabs does not prevent a bulk  
eraser from erasing a cassette  
tape.  
20  
 
14-543.fm Page 21 Wednesday, June 30, 1999 3:52 PM  
CARE AND MAINTENANCE  
Your Radio Shack CD-3319 Portable Triple Play Compact Disc Player and AM/FM  
Stereo Cassette Recorder is an example of superior design and craftsmanship.  
The following suggestions will help you care for the CD-3319 so you can enjoy it for  
years.  
Keep the CD-3319 dry. If it gets wet, wipe it dry immediately. Water  
contains minerals that can corrode electronic circuits.  
Handle the CD-3319 carefully. Dropping it can damage the case and  
circuit boards and cause the CD-3319 to work improperly.  
Use the CD-3319 only in normal temperature environments. Temper-  
ature extremes can shorten the life of electronic devices, damage  
batteries, and warp or melt plastic parts.  
Keep the CD-3319 away from dust and dirt, which can cause prema-  
ture wear of parts.  
Wipe the CD-3319 with a damp cloth occasionally to keep it looking  
CLEANER  
new. Do not use harsh chemicals, cleaning solvents, or strong deter-  
gents to clean the CD-3319.  
Use only fresh batteries of the required size and type. Always remove  
old or weak batteries. They can leak chemicals that destroy electronic  
circuits.  
Modifying or tampering with the CD-3319’s internal components can cause a mal-  
function and might invalidate its warranty and void your FCC authorization to oper-  
ate it. If the CD-3319 is not performing as it should, take it to your local Radio  
Shack store for assistance.  
21  
 
14-543.fm Page 22 Wednesday, June 30, 1999 3:52 PM  
FCC INFORMATION  
CLEANING THE TAPE-  
HANDLING PARTS  
This equipment complies with the lim-  
its for a Class B digital device as spec-  
ified in Part 15 of FCC Rules. These  
limits provide reasonable protection  
against radio and TV interference in a  
residential area. However, your equip-  
ment might cause TV or radio interfer-  
ence even when it is operating  
properly. To eliminate interference,  
you can try one or more of the follow-  
ing corrective measures:  
Dirt, dust, or particles of the tape’s  
coating can accumulate on the tape  
heads and other parts that the tape  
touches. This can greatly reduce the  
performance of the CD-3319. Use the  
following cleaning procedure after ev-  
ery 20 hours of tape player operation.  
1. Remove the batteries and discon-  
nect any other power source.  
2. Open the cassette compartment  
door.  
• Reorient or relocate the radio or  
TV’s receiving antenna  
PLAY  
3. Press  
on the tape deck  
• Increase the distance between the  
CD-3319 and the radio or TV  
to expose the parts you need to  
clean.  
• Use outlets on different electrical  
circuits for the CD-3319 and the  
radio or TV  
4. Use a cotton swab dipped in de-  
natured alcohol or tape head  
cleaning solution to clean the  
record/play head, pinch roller,  
capstan, tape guides, and erase  
head.  
Consult your local Radio Shack store  
or an experienced radio/TV technician  
if the problem still exists.  
5. When you finish cleaning, press  
STOP/EJECT  
, close the cas-  
sette compartment door, and  
reconnect power.  
Your local Radio Shack store sells a  
complete line of cassette deck clean-  
ing supplies.  
22  
 
14-543.fm Page 23 Wednesday, June 30, 1999 3:52 PM  
SPECIFICATIONS  
CASSETTE DECK  
Tape Speed ........................................................................... 17/8 ips (4.75 cm/sec.)  
Tape System ............................................................................ 4 Track/Side/Stereo  
Signal to Noise Ratio .......................................................................................43 dB  
Channel Separation .........................................................................................35 dB  
Wow and Flutter ............................................................................................ 0.25%  
CD PLAYER (Test Point at CD Output)  
Type ......................................................................... CD Player with Optical Pickup  
Channels ............................................................................. Two Channels (Stereo)  
Frequency Response ..................................................................... 20 Hz to 20 kHz  
Digital Filter ............................................................................ 8 times Oversampling  
Signal to Noise Ratio .......................................................................................80 dB  
RADIO  
Frequency Range  
FM ................................................................................................. 88–108 MHz  
AM ............................................................................................. 530–1710 KHz  
Antennas  
FM ................................................................................................................Rod  
AM ...................................................................................................Ferrite Core  
Usable Sensitivity  
FM (1 IHF Usable Sensitivity) ..................................................................6.2mV  
AM (20 dB S/N Sensitivity) .................................................................630 mV/m  
GENERAL  
Output Power (10% THD) ........................................................ 4 Watts/Channel DC  
Speakers  
Woofer ................................................................................Dynamic, 4-Inch × 2  
Tweeter ...................................................................................................... Piezo  
23  
 
14-543.fm Page 24 Wednesday, June 30, 1999 3:52 PM  
Power Supply ........................................AC 120 V, 60 Hz/DC 13.5 V / 9 D Batteries  
Dimensions (HWD) ....................................................... 107/16 × 217/8 × 91/2 inches  
(265 × 555 × 240 mm)  
Weight (without batteries) ....................................................................... 14 lbs 3 oz  
6.44 Kg  
Specifications are typical; individual units might vary. Specifications are subject to  
change and improvement without notice.  
Radio Shack Limited Warranty  
This product is warranted against defects for 90 days from date of purchase from Radio  
Shack company-owned stores and authorized Radio Shack franchisees and dealers.  
Within this period, we will repair it without charge for parts and labor. Simply bring your  
Radio Shack sales slip as proof of purchase date to any Radio Shack store. Warranty  
does not cover transportation costs. Nor does it cover a product subjected to misuse or  
accidental damage.  
EXCEPT AS PROVIDED HEREIN, RADIOSHACK MAKES NO EXPRESS WARRAN-  
TIES AND ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURA-  
TION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. Some states  
do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limi-  
tation(s) or exclusion(s) may not apply to the purchaser.  
This warranty gives you specific legal rights and you may also have other rights which vary from  
state to state.  
We Service What We Sell  
10/95  
RadioShack  
A Division of Tandy Corporation  
Fort Worth, Texas 76102  
2A6  
Printed in Indonesia  
 

Q See Cordless Telephone QSMCC User Guide
Radio Shack Cooktop 61 2420 User Guide
Rangemaster Cooktop Classic 110 User Guide
Runco Flat Panel Television CX 42HD User Guide
Ryobi Brush Cutter RY30520 User Guide
Saeco Coffee Makers Coffeemaker TDCM15 User Guide
Saitek Video Game Controller PS2700 User Guide
Samsung Range FTQ386LWX User Guide
Sansui Flat Panel Television SLED3900 User Guide
Savin Printer C410DN User Guide